Tesamorelin (10mg)

$85.00

SKU: YPB.279 Categories: ,

Description

A single-component research material supplied for controlled research environments. Suitable for studies involving GHRH-receptor pathway characterization and method development in model systems.g., binding and cell-based workflows)
• Chromatographic method optimization for variant and impurity profiling
• Stability characterization of a lyophilized peptide under laboratory storage conditions

For qualified research professionals and institutional laboratories. Not for human use.


Documentation & Quality Assurance

Each lot is sourced through our verified global supply chain with emphasis on traceability and quality control.These documents are reviewed internally and displayed as they become available. Independent third-party testing is also performed on select lots to confirm identity, purity, and alignment with our internal specifications.


Important Notice

This product is intended for laboratory research use only. It is not intended for human or veterinary use, and must not be used for diagnostic, therapeutic, or clinical purposes.
This material is not a drug, medical device, or dietary supplement, and has not been evaluated by the U.S. Food and Drug Administration.


Quality & Manufacturing

All materials are sourced from carefully vetted domestic and international manufacturing partners who follow quality systems consistent with ISO and cGMP principles. Each supplier is reviewed for reliability, documentation integrity, and transparency in testing.

We require a verified purity of 99% or higher and perform independent third-party spot testing to confirm that select lots meet our internal standards for identity, purity, and composition. Where available, endotoxin testing results are included on Certificates of Analysis to verify laboratory purity; their inclusion is for research quality assessment only and does not imply suitability for human or veterinary use.

All research materials are sealed for integrity and packaged for stability during storage and transport from manufacturing through final delivery.

Additional information

Weight 0.0625 lbs
🔬

Published Scientific Research

Explore the full library of peer-reviewed studies, clinical data, mechanism breakdowns, and molecular specifications for Tesamorelin (10mg).

All research is sourced from PubMed-indexed journals for informational and educational purposes only. For Research Use Only (RUO). Not for human use.

View Full Research Library →

Certificate of Analysis

Storage Instructions

All products from House of Compounds are manufactured using a lyophilization (freeze-drying) process. This method is designed to maintain product integrity and allows vials to remain stable during shipping for approximately 3–4 months.

Once a vial is reconstituted with bacteriostatic water, it should be stored in the refrigerator to help maintain stability. Under these conditions, reconstituted material is generally considered stable for up to 30 days.

Lyophilization is a dehydration technique in which compounds are frozen and then exposed to low pressure. This causes the water in the vial to sublimate directly from solid to gas, leaving behind a stable, crystalline white structure. This powder can be kept at room temperature until reconstitution.

Upon receipt, products should be stored away from heat and light. For short-term use, refrigeration at approximately 4°C (39°F) is suitable. For long-term storage (several months to years), vials may be placed in a freezer at approximately -80°C (-112°F). Freezing is the preferred method for preserving product stability over extended periods.

⚠️ Important Notice:
These products are intended for research use only. Not for human consumption.

Research Use Only

The following peer-reviewed publications reference compounds for laboratory and in vitro research purposes only. Not for human or animal use. Not intended to diagnose, treat, cure, or prevent any disease or condition.

PubMed — Peer-Reviewed Research

Published Scientific Research

Peer-reviewed laboratory studies investigating growth hormone peptides

Laboratory Research PubMed

Injectable Peptide Therapy: A Primer for Orthopaedic and Sports Medicine Physicians.

The American journal of sports medicine 2026

RESULTS: BPC-157 demonstrated potential benefits in tendon and muscle repair, but these findings are largely unvalidated in human trials. CJC-1295 combined with ipamorelin showed significantly improved maximum tetanic tension in murine models with glucocorticoid-induced muscle loss, but these findings are limited to animal studies.

View Full Study
Molecular Analysis PubMed

Chromatographic-mass spectrometric analysis of peptidic analytes (2-10 kDa) in doping control urine samples.

Journal of mass spectrometry : JMS 2024

With urine samples representing still the most frequently collected doping control specimens, efficient extraction of peptidic analytes from this matrix was a major goal of this method, as demonstrated for the included compounds such as insulins (human, lispro, aspart, glulisine, tresiba, glargine metabolite, bovine insulin, porcine insulin), growth hormone-releasing hormones (sermorelin, CJC-1295, tesamorelin) incl.

View Full Study
Molecular Analysis PubMed

Probing for peptidic drugs (2-10 kDa) in doping control blood samples.

Analytical science advances 2022

Bioactive peptides with a molecular mass between 2 and 10 kDa represent an important class of substances banned in elite sports, which has been recognized with an increasing number and variety of substances by anti-doping organizations. Also, the annually renewed list of prohibited substances of the World Anti-Doping Agency (WADA) explicitly mentions more and more of these peptides, and efficient testing procedures are required. Even under simplified sample preparation conditions, liquid chroma

View Full Study
In Vitro Study PubMed

Advances in the detection of growth hormone releasing hormone synthetic analogs.

Drug testing and analysis 2021

The administration of growth hormone releasing hormone (GHRH) and its synthetic analogs is prohibited by the World Anti-Doping Agency (WADA). Although there is evidence of their use, based on admissions and intelligence, they do not appear to have been found in anti-doping samples by WADA accredited laboratories. This might be due to their small concentration in urine and limited knowledge about their metabolism, especially for unapproved synthetic analogs. This study investigates the in vitro m

View Full Study
In Vitro Study PubMed

Qualitative identification of growth hormone-releasing hormones in human plasma by means of immunoaffinity purification and LC-HRMS/MS.

Analytical and bioanalytical chemistry 2016

The use of growth hormone-releasing hormones (GHRHs) is prohibited in sports according to the regulations of the World Anti-Doping Agency (WADA). The aim of the present study was to develop a method for the simultaneous detection of four different GHRHs and respective metabolites from human plasma by means of immunoaffinity purification and subsequent nano-ultrahigh performance liquid chromatography-high resolution/high accuracy (tandem) mass spectrometry. The target analytes included Geref (Ser

View Full Study
Molecular Analysis PubMed

Expanded test method for peptides >2 kDa employing immunoaffinity purification and LC-HRMS/MS.

Drug testing and analysis 2015

Bioactive peptides with an approximate molecular mass of 2-12 kDa are of considerable relevance in sports drug testing. Such peptides have been used to manipulate several potential performance-enhancing processes in the athlete's body and include for example growth hormone releasing hormones (sermorelin, CJC-1293, CJC-1295, tesamorelin), synthetic/animal insulins (lispro, aspart, glulisine, glargine, detemir, degludec, bovine and porcine insulin), synthetic ACTH (synacthen), synthetic IGF-I (lon

View Full Study

Frequently Asked Questions

Essential information about our research-grade peptides and quality standards.

Peptides are short chains of amino acids linked by peptide bonds, typically consisting of 2-50 amino acids. They serve as the building blocks of proteins and play crucial roles in biological processes.

Research peptides are synthesized versions of naturally occurring peptides, manufactured to precise specifications for use in scientific studies.

Key characteristics: High purity (≥98%), lyophilized form for stability, accompanied by Certificates of Analysis (COA), and manufactured under strict quality control protocols.

Peptide purity refers to the percentage of the target peptide present in a sample, measured via High-Performance Liquid Chromatography (HPLC).

Our Standard: All our research peptides maintain ≥98% purity, verified by third-party laboratory testing and documented in our Certificates of Analysis.

Higher purity is critical for research because impurities can interfere with experimental results and compromise the reproducibility of studies.

All products are supplied in lyophilized powder form within sterile, sealed vials. This format provides:

  • Maximum stability: Extended shelf life compared to liquid solutions
  • Precise measurement: Researchers can work with desired quantities
  • Contamination protection: Sealed vials prevent environmental exposure
  • Shipping durability: Powder form is more stable during transit

Lyophilized peptides:

  • Store at -4°F for long-term storage (up to 24 months)
  • Store at 36-46°F (refrigerated) for short-term storage (up to 3 months)
  • Keep away from light, moisture, and repeated temperature fluctuations

We supply research-grade peptides to:

  • Academic and university research laboratories
  • Pharmaceutical and biotechnology companies
  • Independent research institutions
  • Licensed professionals conducting legitimate scientific research

We maintain rigorous quality control through a multi-step verification process:

  • HPLC Analysis: Every batch tested to verify ≥98% purity
  • Mass Spectrometry: Molecular weight confirmation for peptide identity
  • Third-Party Testing: Independent laboratory verification
  • Sterility Protocols: Aseptic handling and packaging procedures
  • Batch Documentation: Complete traceability from synthesis to delivery

"Research Use Only" (RUO) is a classification indicating that a product is intended exclusively for laboratory research and experimental investigation.

All orders are shipped with research-grade handling protocols:

  • Packaging: Insulated containers with cold packs when required
  • Carriers: USPS Priority Mail
  • Processing: Orders placed before 12 PM EST ship same business day
  • Tracking: Full tracking information provided via email

We stand behind every product:

  • Quality guarantee: Full replacement or refund if products don't meet stated specifications
  • Shipping issues: Free replacement for damaged or lost shipments
  • Unopened returns: Accepted within 30 days for store credit
You are unable to view this website.

⚠️ Research Use Only — Legal Acknowledgment

All products on this website are sold strictly for in vitro research and laboratory use only.

  • Not for human or veterinary use, consumption, or application
  • Not FDA-approved to diagnose, treat, cure, or prevent any disease
  • Buyer assumes full responsibility for legal compliance in their jurisdiction

This information is collected for merchant compliance and regulatory purposes.

Please select your research affiliation to continue.

By clicking "Accept," you confirm:

  • You are at least 21 years of age
  • You are a qualified researcher or laboratory professional
  • You represent the affiliation type selected above
  • You understand these products are for research purposes only